Zancot Electronics

simatic dp, interface module im151-3 pn st for et200s; transmiss. Rate up to 100 mbit/s max. Of 63 power, electr. Or motor starter modules up to 2m width connectable; 2x bus interfacing via rj45 incl. Terminating module. Realize your future machine concept with an intelligent answer for motion control, signal acquisition/output, closed-loop/pid control up to artificial intelligence (ai) and machine learning.

SIMATIC ET200 IP20. ET200SP, PROFINET IM155-6PN BASIC interface module for ET 200SP, maximum 12 edge modules, includes 2 built-in female RJ45 ports, includes server module

This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N and should be read and understood before attempting to install or use the unit. • If in doubt at any stage during the installation of the FX2N always consult a professional electrical engineer who is qualified and trained to the local and national standards. If in doubt about the operation or use of the FX2N please consult the nearest Mitsubishi Electric distributor. • This manual is subject to change without notice.Any engineer who is responsible for the planning, design and construction of automatic equipment using the product associated with this manual should be of a competent nature, (trained and qualified to the local and national standards required to fulfill that role). These engineers should be fully aware of all aspects of safety with regards to automated equipment. b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the local and national standards required to fulfill that job. These engineers should also be trained in the use and maintenance of the completed product. This includes being completely familiar with all associated documentation for the said product. All maintenance should be carried out in accordance with established safety practices. c) All operators of the completed product should be trained to use that product in a safe and co-ordinated manner in compliance to established safety practices. The operators should also be familiar with all documentation which is connected with the actual

SIMATIC S7-400, Power supply PS407: 10 A, wide range, UC 120/230V, 5 V DC/10 A the S7-400 has been designed for system solutions in the fields of manufacturing and process automation. This process controller is ideal for data-intensive tasks that are especially typical for the process industry. S7-400 and the innovated S7-410 product line will stay the hardware backbone of the PCS 7 control system. For standard and failsafe applications within factory automation the new S7-1500 controller generation takes full advantage of all TIA Portal features.The flexibly configurable SIMATIC S7-400 controller series designed by Siemens is suitable for demanding applications in the process industry. Here, in particular SIMATIC S7-400H and FH systems are used, which ensure a high degree of security and availability.SIMATIC S7-400 controllers stand for long-term security of investment. For this reason, Siemens has systematically further developed the SIMATIC S7-400 series. In this way, they ensure that the right controller will always be available for a vast range of automation solutions in the process industry.Through a long-term supply of spare parts and availability of components, we provide plant operators and constructors permanent access to the SIMATIC S7-400 controller series.

SIMATIC S7-1500, mounting rail 830 mm (approx. 32.7 inch); incl. grounding screw, integrated DIN rail for mounting of incidentals such as terminals, automatic circuit breakers and relays. SIMATIC S7-1500 controller gives you top performance and built-in viability into the future. You can turn the most sophisticated machine designs into reality thanks to the modular structure of the controller, which provides reliable assistance as you work your way through the digital transformation.The Multifunctional Platform TM MFP is designed for integrating various independent applications.

Openess for customized high-level language applications., e.g. C/C++ for protocol converters,database connection,complex algorithms integration of vision systems. Possible use of optional software packages and edge apps e.g.Proneta or SIMATIC Flow Creator.

The module can be seamlessly integrated into the SIMATIC automation system permitting a simple and profitable combination of AI algorithms and PLC logic. This is how inexpensive and rescalable applications using SIMATIC can be implemented at the machine based on artificial intelligence, e.g

Smart object recognition of any workpieces

Visual quality check of products.Quality checking using sensor and production data.The  CPU 1518(F)-4 PN/DP MFP enables the merging of previously separate applications on a common platform.Due to its connectivity and high computing power the MFP CPU is suited for sophisticated control tasks as well as for PC-typical applications that require high-level language programming,are developed model-based or must be implemented using databases.Every SIMATIC S7-1500 CPU supports motion control functions.Technology CPUs provide additional functions such as extended gear synchronization, also across PLCs.Cyclic cams, graphically supported handling system for kinematics and portals.

LOGO! 230RCEo, logic module, PS/I/O: 115 V/230 V/relay, 8 DI/4 DQ, without display, memory 400 blocks, modularly expandable, Ethernet, integr. web server, data log, user-defined web pages, standard microSD card for LOGO! Soft Comfort V8.3 or higher, older projects executable cloud connection in all LOGO! 8.3 basic unit.The LOGO! family offers several communication modules for the communication with external systems.Between LOGO! 8 and communication modules the connection is done exclusively via Ethernet.LOGO! with third party devices via Modbus TCP/IP (client and server)LOGO! with NTP time server (client and server).All basic units with Ethernet port can be operated on WLAN via corresponding access points. This means they can be programmed, monitored and controlled remotely.The integrated web server in all LOGO! 8 basic modules based on message text, as well as the customized web server, are used for monitoring and control the LOGO! via WLAN and the Internet.You can increase the number of Ethernet ports with the LOGO! CSM. This Ethernet 4-port switch allows to set up cost-efficient, small local Ethernet networks.Although LOGO! was mainly designed to replace conventional switching technology, LOGO! offers interesting communication options via the Ethernet ports.LOGO! is the perfect choice for a fast, easy and space saving solution for basic control tasks. LOGO! The intelligent logic module for small automation projects has long been a constant in the automation world. LOGO! basic modules are available with or without integrated display.

LOGO! 24CEo, logic module, without display, PS/I/O: 24 V/24 V/24 V trans., 8 DI (4 AI)/4 DQ, memory 400 blocks, modularly expandable, Ethernet, integr. web server, data log, user-defined web pages, standard microSD card for LOGO! Soft Comfort V8.3 or higher, older projects executable, cloud connection in all LOGO! 8.3 basic units.Basic versions optimised for costsInterface for the connection of expansion modules, up to 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs can be addressed.With connection option for LOGO! TDE text displayAll basic units with integrated web serverEnclosure width 72 mm (4 U)All basic units with Ethernet interface for communication with LOGO! 8, LOGO! TDE, SIMATIC Controllers, SIMATIC Panels and PCsUse of standard micro SD cardsRelay outputs with max. 10 A output current.Integrated EEPROM memory for control program and setpoint values.Optional standard micro CF cards.Integral real-time clock with automatic summer/winter time switchover.Backup of the integrated real-time clock for 20 days.8 digital inputs, 4 digital outputs.4 inputs as analog inputs in 12/24 V DC variants (0 to 10 V); inputs can also be used digitally.4 inputs can be used for high-speed counting up to 5 kHz (DC versions only).Interface for the connection of expansion modules, up to 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs can be addressed.Connection of the LOGO! TDE text display to LOGO! 8 via Ethernet.AND, OR, NOT, NAND, NOR, XOR, positive/negative pulse edge evaluation.ON delay, latching ON delay, OFF delay, impulse relay, locking relay, counter (forward/backward), time switch, interval time-delay relay, operating hours counter, trigger, asynchronous pulse generator, year time switch, comfort light switch function, random generator, staircase light switch function as per DIN 18015-2, edge-triggered interval time-delay relay, combined ON/OFF delay, analog comparator, analog trigger, analog delta trigger, analog watchdog, analog amplifier, shift register, soft key function, PI controller, ramp function, analog multiplexer, PWM function, analog arithmetic function, function for detecting errors in the analog arithmetic function.400 function blocks can be interlinked.64 bit memories (including restart bit memory, bit memory for controlling the backlight of the LOGO! TDE, bit memory for switching between 2 parameterizable character sets in the message text).

SINAMICS G120 Basic Operator Panel (BOP-2) The modular structure of the components and the wide power range from 0.55 to 250 kW ensure that you are always able to assemble the ideal converter for your individual applications and industry branche.This series of converters is available in three voltage variants for connection to 200 V, 400 V and 690 V networks. In addition, the SINAMICS G120 features a comprehensive machine safety package. SINAMICS Startdrive is used for commissioning the safety functions.SINAMICS G120, the multifunctional frequency converter for your diverse tasks.Host of component combination options (Power Module, Control Unit, operator panel).Simple connection to electric motors and control systems into your existing system and automation landscape.With Totally Integrated Automation (TIA Portal) and SINAMICS Startdrive – one standard engineering for all drives.Wide power range from 0.55 kW to 250 kW.Versatile drive system for the most diverse applications and industry branches.Available not only in low and medium, but also in high-voltage versionsThe Control Unit controls and monitors the Power Module and the connected motor using multiple selectable closed-loop control types. It supports communication with a local or central controller and monitoring devices. The Power Module supplies the motor in a power range from 0.37 kW to 250 kW. It features state-of-the-art IGBT technology with pulse width modulation for extremely reliable and flexible motor operation. Comprehensive protection functions provide a high level of protection for the Power Module and the motor.