Zancot Electronics

The Allen-Bradley 22B-D010N104 is a PowerFlex 4 Variable Frequency Drive (VFD). This VFD is powered with an input voltage rating of 342-528, 3-phase with applicable motor output of 10.5 A and Power of 4.0 kW (5.0 HP).The 22B-D010N104’s input voltage range is 340 to 528 Volts AC with an apparent input power of 10.8 KV at 13 Amps. It has an output power of 4kW (5 Horsepower) and an output current of 10.5 Amps. The 22B-D010N104 recommended fuse rating is 20 A UL Class J, CC, T or Type BS88; 600V fuse type while the recommended motor circuit protection is 140M-C2E-C16. The 22B-D010N104 has an output programmable frequency range of 0 to 400 Hertz and an operational efficiency of 97.5%. It has a digital input voltage at SRC of 18 to 24 Volts in the on state, and 0 to 6 Volts in the off state. It also has a 0 to 6 Volts off sink mode and an 18 to 24 Volts on sink mode. The 22B-D010N104 also has an analog input with 4 to 20 mA at a 250 Ohm input impedance, and a 0 to 10 Volts DC voltage at a 100k Ohm input impedance. The 22B-D010N104 can communicate with other devices through an RS-485 communication port.

SIMATIC DP, ET 200ECO PN, 8 DO 24V DC/2A; 8 X M12, DEGREE OF PROTECTION IP67

EtherNet/IP Tap w/ 2 copper ports, 1 fiber port

1732 ArmorBlock EtherNet/IP, EtherNet/IP, Output Module, 8 Scheduled Sourcing Output, Dual-Port, DC Micro (M8), With CIP SYNC Input, Without Diagnostics, Dual Port.

1732D and 1732E ArmorBlock I/O modules provide low-cost, hardened, I/O suitable for on-machine use. You can mount these modules on a machine close to the sensors and actuators to provide shorter cable runs for automotive, material handling, and high-speed packaging applications. These modules are available for DeviceNet® and EtherNet/IP™ networks and are suitable for use in welding applications and end-of-arm robot applications.Available with water- and corrosion-proof plastic and nickel-plated aluminium sealed housing.Offers rating for IP69K and NEMA 4X (when marked) for use without an enclosure.Includes LEDs for module and/or channel level alarms and diagnostics which can reduce machine downtime.Provides efficient installation and replacement without having to rewire which can reduce wiring error.Includes Add-on Profiles in the Studio 5000 Logix Designer Application.

 Ford POINT I/O Adaptor Module.Built-in power supply powers the I/O modules through the backplane · Up to 63 I/O modules per assembly, for up to 504 points on a single network node · Provide the interface between the POINT I/O™ modules and backplane, and the desired network · Snap directly onto the DIN rail.Modular design lets you independently select the I/O, termination style, and network interface.Modules slide together for easy install and uninstall for easier maintenance.Removable wiring system saves time and money during installation and troubleshooting.Comprehensive diagnostics and configurable features makes POINT I/O™ easy to apply.Removal and Insertion Under Power (RIUP) lets you replace modules while the system is in operation.Mount horizontally or vertically, with no derating required.Auto Device Replacement (ADR) reduces downtime.Add-on-Profiles in the Studio 5000 Logix Designer® application provide smooth integration into Integrated Architecture systems.Available with conformal coating.

Ford POINT I/O Dual Port Adaptor Module.Built-in power supply powers the I/O modules through the backplane · Up to 63 I/O modules per assembly, for up to 504 points on a single network node · Provide the interface between the POINT I/O™ modules and backplane, and the desired network · Snap directly onto the DIN rail.

Modular design lets you independently select the I/O, termination style, and network interface.Modules slide together for easy install and uninstall for easier maintenance.Removable wiring system saves time and money during installation and troubleshooting.Comprehensive diagnostics and configurable features makes POINT I/O™ easy to apply.Removal and Insertion Under Power (RIUP) lets you replace modules while the system is in operation.Mount horizontally or vertically, with no derating required.Auto Device Replacement (ADR) reduces downtime.Add-on-Profiles in the Studio 5000 Logix Designer® application provide smooth integration into Integrated Architecture systems.Available with conformal coating.

Network Adapter, POINT I/O, ControlNet, Dual Media, 63 Module Capacity on POINTBus, 425ma @24VDC, Open Style, DIN Mounted.Built-in power supply powers the I/O modules through the backplane · Up to 63 I/O modules per assembly, for up to 504 points on a single network node · Provide the interface between the POINT I/O™ modules and backplane, and the desired network · Snap directly onto the DIN rail.Modular design lets you independently select the I/O, termination style, and network interface.Modules slide together for easy install and uninstall for easier maintenance.Removable wiring system saves time and money during installation and troubleshooting.Comprehensive diagnostics and configurable features makes POINT I/O™ easy to apply.Removal and Insertion Under Power (RIUP) lets you replace modules while the system is in operation.Mount horizontally or vertically, with no derating required.Auto Device Replacement (ADR) reduces downtime.Add-on-Profiles in the Studio 5000 Logix Designer® application provide smooth integration into Integrated Architecture systems.Available with conformal coating.

SIMATIC ET 200SP, DIGITAL INPUT MODULE, DI 8X 24VDC HIGH FEATURE FITS TO BU-TYPE A0, COLOR CODE CC01, CHANNEL DIAGNOSIS

SIMATIC S7-200, ANALOG I/O EM 235, FOR S7-22X CPU ONLY, 4 AI, DC +/-10V; 1AQ, DC +/-10V 12 BIT CONVERTER

SIMATIC DP, 5 electronic modules for ET 200S, 2 DI High Feature 24 V DC, 15 mm width, with param. input delay Diagnostics encoder short circuit with SF LED (group fault) 5 units per packing unit

SIMATIC S7-1200, DIGITAL I/O SB 1223, 2DI/2DQ, 24VDC 200KHZ

SIMATIC PCS 7, PS 407 4A XTR S7-400, POWER SUPPLY, WIDE RANGE 120/230V UC,5V DC/4A FOR EXTENDED TEMP. RANGE AND WITH COMFORMAL COATING

SIMATIC S7-200, CPU 226 COMPACT UNIT, DC POWER SUPPLY 24 DI DC/16 DO DC, 8 KB CODE/5 KB DATA, 2 PPI/FREEPORT PORTS

SIMATIC S7-1200F, CPU 1212 FC, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 8 DI 24V DC 6 DO 24 V DC 2 AI 0 - 10V DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY 100 KB

SIMATIC S7, Digital input SM 326, 8 DI; 24 V DC, NAMUR, fail-safe NAMUR input for SIMATIC S7 F-systems, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole

SIMATIC S7-300, FIRMWARE L INCL. CONFIG. PACKAGE FOR FM357-2, FOR POSITIONING AND PATH CONTROL OF STEPPER AND SERVO MOTORS, FORM OF DELIVERY: MEMORY CARD AND CD

Simatic S7-300, RAIL L=480MM

SIMATIC S7-400H, CPU 417-5H, central processing unit for S7-400H and S7-400F/FH, 5 interfaces: 1x MPI/DP, 1x DP, 1x PN and 2 for sync modules, 32 MB memory (16 MB data/16 MB program)

Simatic S7-300, RAIL L=160MM

SIMATIC S7-400, Power supply PS 405: 4 A, 24/48/60 V DC, 5 V DC/4 A, ATEX approval marking

SIMATIC S7-400, CONTROL MODULE FM 455 S, 16 CHANNELS, STEP AND PULSE 8/16 AI + 16 DI + 32 DO

SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 8 DI AND 8 DO, 24V DC, 0.5A AGGREGATE CURRENT 2A, 1X20 PIN

SIMATIC S7-400, IM CABLE WITH K BUS, 5 M

SIMATIC S7-200, CPU 215 COMPACT UNIT, DC POWER SUPPLY 4K PRG/2,5K DW, 14DI DC/10DQ DC PROFIBUS-DP INTERFACE

SIMATIC S7-400, CPU 412-2 PN Central processing unit with: Work memory 1 MB, (0.5 MB code; 0.5 MB data) interfaces 1st interface MPI/DP 12 Mbit/s, (X1), 2nd interface Ethernet/PROFINET (X5)

SIMATIC S7-300, Digital output SM 322, isolated, 32 DO, 24 V DC, 0.5A, 1x 40-pole, Total current 4 A/group (16 A/module)

SIMATIC S7-1200, Digital I/O SM 1223, 8 DI/8 DO, 8 DI 24 V DC, Sink/Source, 8 DO, transistor 0.5 A

SIMATIC S7, DIGITAL OUTPUT SM 326, 10 DO; 24V DC, 2A, FAILSAFE OUTPUT MODULE FOR SIMATIC S7F SYSTEMS WITH DIAGNOST. INTERRUPT, 40 PIN

SLC 500 24V DC Input Module, 16-Channel, Sourcing. 16 Inputs 24V DC, 16 Points Per Common

1734-IE2V Point I/O 24V DC 2 Channel Analog Voltage Input Module

1771-RTP3 Remote Termination Panel for 1771-N Series I/O

1734OA4 POINT I/O 120/230V AC 4-Channel Output Module

MicroLogix 1200, 32 Point 24VDC Sink Output Module

Conformal coated redundant power supply chassis adapter module. Qty-1.

DeviceNet Interface                                      Module for SLC 500,                              MicroLogix and CompactLogix

DeviceNet, Combination Block, 8 Sink/Source Inputs, 8 Sourcing 0.5A Outputs

SLC 500 Analog Voltage Output Module 4 Voltage Outputs ?10V DC (not individually isolated); Requires both 5V DC and 24V DC power from backplane or external 24V DC Power Supply

1734-IA2 POINT I/O 120V AC 2-Channel Input Module

Guardlogix 5580 Partner Guardlogix 5580 Partner Guardlogix 5580 Partner Guardlogix 5580 Partner Guardlogix 5580 Partner

1734-OE2C POINT I/O 24V DC 2-Channel Analog Current Output Module