Zancot Electronics

SIMATIC DP, Electronics module f. ET200S, 2AI Standard I-4DMU 15 mm width, +/-20mA; 13 bit+sign 4.. 20mA; 12-bit for 4-wire transmitter Cycle time 65 ms/channel with SF LED (group fault) 

SIMATIC S7-200, CPU 226 Compact unit, AC power supply 24 DI DC/16 DO relay 16/24 KB progr./10 KB data, 2 PPI/user-programmable interface 

SIMATIC OP 270 6? Operator panel 5.7? STN color display 2 MB configuration memory, configurable with ProTool From Version V6.0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V / 10 A DC.SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V / 10 A DC

SIMATIC BUSADAPTER BA 2XLC, 2 X LC GLASS-FO-CONNECTORS, FOR PROFINET SIMATIC bus adapter BA 2xLC, 2x LC glass FOC connections. Product family, BusAdapters. Product Lifecycle (PLM), PM300

DeviceNet, Combination Block, 8 In/8 Out With Point Level Diagnostics

Allen Bradley 2080-LC20-20QWB Micro820 Controller, Embedded Ethernet Port and RS-232/485 Non-isolated Serial Port, (12) 24V DC Digital Inputs, (7) Digital Relay Outputs, (1) Analog Output, (4) Configurable Analog Inputs with Thermistor Voltage Reference Out, Embedded RTC, MicroSD Card Support, 2 Plug-In Slots, 24V DC Power

SIMATIC Thin Client protected 15í Touch. IP65. External device 15í TFT display. 64K colors. client: SmartAccess. RDP. Web IP65 device for external mounting. no built-in unit

Analogue I/O Adaptors- right hand mounting Mitsubishi FX3G The FX3G can be recognized as the successor to the FX1N that will continue the concept of combining performance with affordability.

This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N and should be read and understood before attempting to install or use the unit. • If in doubt at any stage during the installation of the FX2N always consult a professional electrical engineer who is qualified and trained to the local and national standards. If in doubt about the operation or use of the FX2N please consult the nearest Mitsubishi Electric distributor. • This manual is subject to change without notice.Any engineer who is responsible for the planning, design and construction of automatic equipment using the product associated with this manual should be of a competent nature, (trained and qualified to the local and national standards required to fulfill that role). These engineers should be fully aware of all aspects of safety with regards to automated equipment. b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the local and national standards required to fulfill that job. These engineers should also be trained in the use and maintenance of the completed product. This includes being completely familiar with all associated documentation for the said product. All maintenance should be carried out in accordance with established safety practices. c) All operators of the completed product should be trained to use that product in a safe and co-ordinated manner in compliance to established safety practices. The operators should also be familiar with all documentation which is connected with the actual

This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N and should be read and understood before attempting to install or use the unit. • If in doubt at any stage during the installation of the FX2N always consult a professional electrical engineer who is qualified and trained to the local and national standards. If in doubt about the operation or use of the FX2N please consult the nearest Mitsubishi Electric distributor. • This manual is subject to change without notice.Any engineer who is responsible for the planning, design and construction of automatic equipment using the product associated with this manual should be of a competent nature, (trained and qualified to the local and national standards required to fulfill that role). These engineers should be fully aware of all aspects of safety with regards to automated equipment. b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the local and national standards required to fulfill that job. These engineers should also be trained in the use and maintenance of the completed product. This includes being completely familiar with all associated documentation for the said product. All maintenance should be carried out in accordance with established safety practices. c) All operators of the completed product should be trained to use that product in a safe and co-ordinated manner in compliance to established safety practices. The operators should also be familiar with all documentation which is connected with the actual

The first model in the iQ-F series is the FX5U, offering high performance in a compact, cost effective package.The FX5U continues the FX tradition of total flexibility by offering a huge range of new and existing add-on options which further enhance the built-in functions of Ethernet, analogue I/O, data logging, position control, security, communications and networking functions incorporated as standard.The FX5U will provide users with the ability to specify more powerful systems but with fewer overall components, saving time and cost.

The first model in the iQ-F series is the FX5U, offering high performance in a compact, cost effective package.The FX5U continues the FX tradition of total flexibility by offering a huge range of new and existing add-on options which further enhance the built-in functions of Ethernet, analogue I/O, data logging, position control, security, communications and networking functions incorporated as standard.The FX5U will provide users with the ability to specify more powerful systems but with fewer overall components, saving time and cost.

SIMATIC IFP (Ethernet MON). 19í Touch TFT. with continuous foil. INOX enclosure. all-round IP66. Flange adapter for supporting foot. 2x illuminated pushbuttons LED. 1x emergency switching-off on terminal. Display port. Ethernet. USB. 24 V DC power supply based on SIMATIC IFP1900 (6AV7863-3MA20-0AA0) for connection (1: 1) at IPC427D

SIMATIC ET 200SP. Digital output module. DQ 16x 24V DC/0.5A STANDARD. Source output (PNP.P-switching) Packing unit: 10 pieces. fits to BU-type A0. Colour Code CC00. substitute value output. module diagnostics for: short-circuit to L+ and ground. wire break. supply voltage

SIMATIC HMI SMART 1000 IE V3, SMART Panel, Touch operation, 10? widescreen TFT display, 65536 colors, RS422/485 interface, Ethernet (RJ45) interface, host USB type A, RTC support, with CE certificate, configurable from WinCC flexible SMART; contains open-source software, which is provided free of charge see enclosed CD

SIMATIC MOBILE PANEL 177 DP W. INTEGRATED ENABLING BUTTON, STOP BUTTON, HANDWHEEL, KEY SWITCH AND ILLUMINATED PUSHBUTTON UNIT, CONFIGURABLE W. WINCC FLEXIBLE COMPACT VERSION 2005 AND HIGHER OR TIA PORTAL V11 AND HIGHER

SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour Code CC40, substitute value output, module diagnostics for: supply voltage

SIWAREX R TOP UNIT FOR LOAD CELLS SERIES RN - RATED LOAD 60T - MADE OF STAINLESS STEEL CONTAINS: -TOP PLATE W. FORCE GUIDING P. - SELF-ALIGNING BOLT

SIMATIC ITC1500 V3. Industrial Thin Client. 15í widescreen TFT display. capacitive touch sensor. Supported protocols: RDP. VNC. SMARTSERVER HTML5 et. al.. Standard Design. panel mount

The Siemens 6ES7307-1EA80-0AA0 is a SIMATIC S7-300 Outdoor Regulated Power Supply (PS307) designed to reliably power PLC systems and automation components in industrial environments. This robust DIN-rail mounted 24 V DC/5 A power module supports a wide input range of 120 V to 230 V AC and delivers a stable DC output ideal for S7-300 CPUs, I/O racks, HMIs and distributed automation modules.

Built with short-circuit and overload protection and an LED “24 V OK” status indicator, this power supply ensures safe, dependable energy delivery that helps maintain uptime on critical control systems. The outdoor-capable enclosure makes it suitable for industrial control cabinets exposed to harsher operating conditions where stable power is essential.

Whether for new installations, spare parts stocking, or retrofit/legacy PLC maintenance, the 6ES7307-1EA80-0AA0 remains a key component in SIMATIC S7-300 automation systems worldwide.

SIMATIC DP. ELECTRONIC MODULE DIGITAL. FOR ET 200B. W=235MM. 32DI 24V DC. 0.2MS INPUT DELAY

SIMATIC IPC 477D. 12í Touch. Petrol Basic: 6AV7240-0AB04-0HA0. with customer-specific design with customer-specific BIOS

SIMATIC ITC1900 V3. Industrial Thin Client. 19í widescreen TFT display. capacitive touch sensor. Supported protocols: RDP. VNC. SMARTSERVER HTML5 et. al.. Standard Design. panel mount

SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DI HIGH FEATURE 24V DC, 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT

SIMATIC Multi Panel MP 370 12? color TFT display, Touch Windows CE 3.0 configurable with ProTool From Version V5.2+SP3

SIMATIC S7-200, Modem expansion module Analog modem, for PPI, MODBUS master/slave, SMS functionality and S7-200-to-S7-200 communication, callback and password protection Notes

SIMATIC S7-1200, analog I/O module SM 1234, 4 AI/2 AO, +/-10 V, 14-bit resolution or 0 (4)-20mA, 13-bit resolution

SIMATIC HMI KTP700F MOBILE. 7.0í TFT DISPLAY. 800 X 480 PIXELS.16M COLOR. KEY AND TOUCH OPERATION. 8 FUNCTION KEYS. 1 X PROFINET/INDUSTRIAL. ETHERNET INTERFACE; 1 X MULTIMEDIA CARD. 1 X USB. ACKNOWLEDGEMENT SWITCH. EMERGENCY-STOP BUTTON. CONFIGURABLE FROM WINCC COMFORT V13 SP1

SIMATIC Touch Panel TP 170MICRO for SIMATIC S7-200 5.7? blue mode STN display configurable with WinCC flexible 2004 Micro

SIMATIC HMI SMART 700 IE, SMART Panel, Touch operation, 7? widescreen TFT display, 65536 colors, RS422/485 interface, Ethernet (RJ45) interface, with CE certificate, configurable from WinCC flexible 2008 SP4 China; contains open-source software, which is provided free of charge see enclosed CD

SIMATIC ITC2200 V3. Industrial Thin Client. 22í widescreen TFT display. capacitive touch sensor. Supported protocols: RDP. VNC. Smart Server. HTML5. etc.. standard design. Built-in unit

SIMATIC HMI MTP1900. Unified Comfort Panel. neutral. touch operation. 18.5í widescreen TFT display. 16 million colors. PROFINET interface. configurable from WinCC Unified Comfort V16. contains open-source software. which is provided free of charge See enclosed Blu-Ray

SIMATIC IFP (Ethernet MON). 19í Touch TFT. with continuous foil. INOX enclosure. all-round IP66. Flange adapter for support arm. 2x illuminated pushbuttons LED. 1x emergency switching-off on terminal. Display port. Ethernet. USB. 24 V DC power supply based on SIMATIC IFP1900 (6AV7863-3MA20-0AA0) for connection (1: 1) at IPC427D

SIMATIC DP, 5 ELECTRON. MODULES ET 200S: 4DI UC 24V...48V, 15 MM WIDTH, WITH LED SF (GROUP FAULT), 5 PIECES PER PACKAGING UNIT

SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DI STANDARD 24V DC, 15 MM WIDTH, 5 PIECES PER PACKAGING UNIT

SIMATIC S7-200, T/C INPUT MOD. EM 231, FOR S7-22X CPU ONLY, 8 AI, +/-80 MV AND THERMOCOUPLE TYPE J,K,S,T,R,E,N; 15BIT+SIGN

The Allen-Bradley 2711-T10C10 PanelView 1000 is a rugged industrial Human Machine Interface (HMI) terminal designed for visualizing and controlling machinery and processes in factory automation environments. Featuring a 10.1″ color TFT touchscreen with a 640 × 480 resolution and resistive touch interface, this HMI allows operators to interact intuitively with automation applications.
With built-in DeviceNet communication and an RS-232 printer port for logging and alarm printing, the 2711-T10C10 integrates seamlessly with PLCs and industrial networks. Its NEMA Type 12/13 and IP54/IP65 ratings (when panel mounted) offer protection against dust and water in indoor installations.
Powered by a wide-range AC supply (85–264 V), this ergonomic operator terminal also features extensive memory (1008 KB non-volatile + 310 KB runtime) for application storage. Ideal for OEMs, machine builders, and industrial control panels, it continues to support legacy systems reliably.

74-132 VAC Input 32 Pts (36P) - Conformally Coated, 74-132 VAC Input 32 Pts (36P) - Conformally Coated, 74-132 VAC Input 32 Pts (36P) - Conformally Coated

EtherNet/IP 10/100 Mbs FLEX I/O Adapter Module (10BaseT); Network: EtherNet/IP; I/O Module Capacity: 8; Communication Rate: 10/100 Mbps

DeviceNet FLEX I/O 24V DC Media Adapter Module; DeviceNet I/O Module Capacity: 8 modules; Communication Rate: 125/250/500 Kbps